This smart addition to your next movie night is easier to make than you’d think.
Share this story
When your TV doesn’t exactly go with your room decor, hide it. That’s what a remote-controlled TV lift can do to add more wall space and minimize clutter in your room. In this episode, Clagett demonstrates how to make your own remote-controlled TV lift that automatically rises up from the top of a cabinet and hides away when you’re not using it. Clagett was inspired by the remote tailgate release feature on the Ford F-150, which lowers the truck’s tailgate automatically at the push of a button and makes it easy to load cargo in or out of the truck bed.
Want your own remote-controlled TV lift? Watch the video above and follow these simple steps.
DIY Contractor Table Saw Standhow to DIY Contractor Table Saw Stand for Here’s what you’ll need:
- Circular saw
- Cordless drill
- 48-inch level or straight edge
- Flat-screen TV
- Piano hinge
- Remote-controlled TV lift
Step 1: Prep the inside of the cabinet.
Remove any shelves or other features that could get in the way of the TV. This is where you’ll build in your lift.
Step 2: Cut the top piece of the cabinet in half.
To make sure you have a perfect cut, clamp down the level or straight edge lengthwise in the middle of the board. Use the circular saw to cut along the top of the board.
Step 3: Install the piano hinge.
In comparison to separate hinges that are difficult to line up in a straight line, a piano hinge (or continuous hinge) is a series of attached hinges that you can screw into place all at once. First, use the cordless drill to screw the hinges onto the back piece of the cabinet top. Attach this piece to the cabinet by screwing in the other side of the hinges to the back of the cabinet.
Step 4: Install the TV stand.
Use the cordless drill to attach the lift to the cabinet. Most lifts will need to be attached to both the bottom and the back of the cabinet, and the kit should come with hangers that you’ll need to mount to the back of the TV.
DIY Contractor Table Saw Standhow to DIY Contractor Table Saw Stand for Step 5: Mount the TV to the lift.
DIY Contractor Table Saw Standhow to DIY Contractor Table Saw Stand for With the lift installed in the cabinet, mount the TV onto the lift. Plug in both the TV and the 1 last update 2020/07/10 the lift. With the lift installed in the cabinet, mount the TV onto the lift. Plug in both the TV and the lift.
There you have it! Your living room just got a whole lot smarter. Stay tuned for more DIY episodes inspired by the Ford F-150.